3
Fitting the Seal
Slide the seal over the top of the swivel head and down over the main body as illustrated in
Figure 1. The seal should sit in the groove just above the footpad.
Once in place, the seal should rotate and turn freely about the base of the main body.
The seal should be placed with the pleats facing upwards.
IMPORTANT:
Please note that the footpad and seal are wearing items and are not covered by the warranty. In
order to prevent damage to the Super Sweepy main body they must be replaced when worn.
Note:
Damage to the main body
due to foot pad wear invalidates
the warranty.
The pleated seal is suitable for
plastered, vinyl, fibreglass and
chip-tile swimming pools.
Summary of Contents for Super Sweepy
Page 1: ...1...