1.
Chapter 7.5 ‘Shutting down’ on page 25
).
2.
If necessary, secure the material pressure pump or pressurised material container for the
spray medium against a restart.
Fig. 9: Connecting cleaning agents
3.
Interrupt the external material supply.
4.
Connect a container with the cleaning agent to the material connection ( Fig. 9/1, or 3) or fill
the suction or flow pressure cup with cleaning agent.
5.
Switch on the compressed air supply.
6.
Where applicable, switch on the material pressure pump or pressurised material container
for the spray medium.
7.
WARNING!
Sound pressure level
WARNING!
Risk of injury due to recoil forces during the activation of the hand-held spray
gun!
Start the spraying process by actuating the trigger ( Fig. 9/2).
8.
Spray until the cleaning agent runs clear.
Operating instructions
T-Dok-692-GB-Rev.0
[email protected], www.krautzberger.com
GB–30
Summary of Contents for 200-0415
Page 52: ......
