Assembling compressed-air motor
Fig. 16: Assembling compressed-air motor
1.
Install respectively the ball bearings ( Fig. 16/10) into the bearing cover ( Fig. 16/1) or the
turbine housing ( Fig. 16/2).
2.
Clean sealing surfaces at the bearing cover ( Fig. 16/1) and the turbine housing ( Fig. 16/2).
3.
Place sealing ( Fig. 16/24) onto the bearing cover ( Fig. 16/1).
4.
Put together turbine cover ( Fig. 16/2) and bearing cover ( Fig. 16/1). At the same time,
install the shaft of the turbine wheel ( Fig. 16/3) with the discs ( Fig. 16/12) into the ball
bearing ( Fig. 16/10).
Fig. 17: Assembling compressed-air motor
Operating instructions
T-Dok-031-GB-Rev.4
[email protected], www.krautzberger.com
GB–28
Summary of Contents for 200-0356
Page 44: ......
