7.3 Dis-/assembling agitator
Uninstall agitator
Fig. 8: Disassemble agitator
1.
Unscrew threaded pin ( Fig. 8/3).
2.
Remove agitator ( Fig. 8/2) from the shaft ( Fig. 8/1).
Installing agitator
1.
Slide agitator ( Fig. 8/2) onto the shaft ( Fig. 8/1).
2.
Tightly screw in agitator ( Fig. 8/2) with the threaded pin ( Fig. 8/3).
7.4 Disassembling and assembling gear box and compressed-air motor
In the following, the complete disassembly and the complete assembly of the gear box is
described in general terms. This allows the replacement of any defective part.
Only use the manufacturer's OEM parts.
Operating instructions
T-Dok-031-GB-Rev.4
[email protected], www.krautzberger.com
GB–22
Summary of Contents for 200-0356
Page 44: ......
