8.8 Changing O-ring in air connection
Disassembly
1.
Chapter 7.5 ‘Shutting down’ on page 24
).
2.
If necessary, secure fluid pressure pump or pressurised fluid container for the spray media
against restart.
3.
Interrupt the external material supply.
Fig. 17: Removing the O-ring
4.
Unscrew double nipple ( Fig. 17/3) of the air connection ( Fig. 17/1) with suitable fork
wrench.
5.
Remove O-ring ( Fig. 17/2) from the double nipple ( Fig. 17/3).
Operating instructions
T-Dok-198-GB-Rev.3
[email protected], www.krautzberger.com
GB–38
Summary of Contents for 090-3566
Page 60: ......
