19
KRAUSMANN POWER TOOLS
U71012-00
1
2
English |
EN
Always switch off the tool before insertion or
removal of the battery pack. To remove the battery
pack, withdraw it from the tool while pressing the
release button. To insert the battery pack, slide the
pack into the body of the tool. Always insert it all
the way until it locks in place with a little click. If not,
it may accidentally fall off the tool, causing injury
to you or someone around you. Do not use force
when inserting the battery pack. If the pack does
not slide easily, it is not being inserted correctly.
Removing or inserting the battery
pack
Switching the tool ON and OFF
To switch the tool on, push the ON / OFF switch
1
(fig 1). To turn the tool off, release the ON / OFF
switch
1
. The ON / OFF switch is fitted with a brake
function which stops your chuck immediately
when you quickly release the switch. The variable
speed control enables you to select the best speed
for a particular job. The further you squeeze the
switch, the faster the drill will operate.
WARNING:
D
o not operate for long periods at low speed because
excess heat will be produced internally.
fig 1
The rotation direction of the drill chuck
6
can be
changed using the rotation direction switch
2
(fig 1).
To change the direction of rotation, stop the
machine and turn the left / right switch
2
in
the desired direction (fig 1).
T
he central position of the left / right switch
2
locks the ON / OFF switch
1
.
B
efore beginning to work, check that the
rotation direction switch
2
is in the desired
position in order to avoid potential damage
to the tool or to the battery powered drill.
For drilling and screw driving use right
rotation. Use left rotation only to unscrew or
release a jammed drill.
Left / right motion direction
Two-speed gear control
WARNING:
Never change the direction of rotation when the chuck is
rotating. Wait until it has stopped.
This machine has a two-speed gear control de-
signed for drilling or driving screws at low speeds
(position 1) or high speeds (position 2). A slide
switch
3
is located on top of the drill (fig 2) to select
either low or high speed.
Power supply
No-load speed
Chuck
Max. Torque
Impact rate
Adjustable torque
Drilling capacity in
Masonry
Steel
Wood
Tool weight
Tool
U71012-00
20 V
0-400/0-1400 min
-1
10 mm, automatic
30 Νm
0-19500 ipm
18+3
10 mm
10 mm
22 mm
820 gr
Working LED light
The working LED light
8
can be used in poor
lighting conditions to illuminate the work area. The
working LED light will light up as soon as you press
the ON / OFF switch
1
.
The three lights
7
on the side of the tool body (red,
orange, green) indicate the battery capacity status.
Battery capacity indicator
Red:
0% - 20%
O
range:
20% - 60%
G
reen:
60% - 100%.
