KRAUSMANN C1222, Operation Manual, Page: 6 / 12

6
C1222 KRAUSMANN POWER TOOLS
The charger has been used properly
and for the purpose for which it was
purchased.
T
he charger presents a problem
that is due to faulty material and
manufacturing.
I n capability of the charger to perform
according to the technical specs
provided.
Wear due to improper use.
P artial or total disassembly.The tool’s
shell must be disassembled only by
personnel authorised by the official
distributor.
D amage due to overloading.
Usage of incorrect or incompatible
accessory.
B ad maintenance from the operator or
any other third party.
W ear that was induced by external
factors or rogue particles (dust, debris
etc.).
W ear due to non compliance with the
instructions in this manual.
Terms of warranty
The warranty is valid only when:
Damages are not covered by the warranty
that are due to causes such as:
If, during the warranty period, there is a
fault that can not be repaired from the
authorised service department, the tool will
be replaced without any extra cost.
In case there is a need for a repair after the
5. Repair / Servicing
Contact your local government collection
systems available.
I f electrical machines are disposed of in
landfills or dumps, hazardous substances
can leak into the groundwater and get into
the food chain, damaging your health and
well-being. When replacing old machines
with new ones, the retailer will be happy to
take back your old machine for disposal.
Do not dispose of electrical
machines as unsorted
municipal waste, use
separate collection
facilities.
6. Disposal
7. Declaration of
Conformity
PAPADEAS S.A.
4-6 Iroon 1912 St., 13671, Acharne, Greece
Authorized Representative
Herewith declares that:
T
he Charger with CODE: C1222 and
distinctive title: XH1350-2200X-38 under the
brand KRAUSMANN (Description: Battery fast
charger 13.5V, 2.2A) , is designed in conformity
with provision of the Directive 2014/30/EU
and the following manufacturing standards:
EN55014-1, EN55014-2, EN61000-3-2,
EN61000-3-3.
Year in which “CE” marking was affixed:
Machineyear 2018
Date: October 17th, 2018
* Accessories and contents may change
from the production factory without any
warnings, in that case the company bears no
responsibility.
English | EN
for amateur use overs any faulty material
and manufacturing. The receipt or invoice
of purchase needs to be displayed in case of
a repair that is covered by the warranty. For
possible faults during the warranty period,
you should address your issue to the retail
shop from which the purchase was made.
warranty period has expired, we will provide
the best possible attention to repair the tool
successfully.