KRAUSMANN 8506, Operation Manual, Page: 15 / 16

15
KRAUSMANN POWER TOOLS 8506
English | EN
maintain peak efficiency of the motor, we recommend
every two to six months the brushes be examined.
Store the tool, operating instructions and where nec-
essary the accessories in the original packaging. In this
way you will always have all the information and parts
ready to hand.
Wear ear defenders
Wear safety goggles
Wear a dust mask
This tool has been checked by the manufacturer.
From the date of purchase by the final consumer,
a two year warranty for amateur use covers any
faulty material and manufacturing. The receipt or
invoice of purchase needs to be displayed in case
of a repair that is covered by the warranty. For
possible faults during the warranty period, you
should address your issue to the retail shop from
which the purchase was made.
6. Warranty
Terms of warranty
Wear due to non compliance with the instruc-
tions in this manual.
I f, during the warranty period, there is a fault that
can not be repaired from the authorised service
department, the tool will be replaced without any
extra cost.
The tool has been used properly and for the
purpose for which it was purchased.
T he tool presents a problem that is due to
faulty material and manufacturing.
I ncapability of the tool to perform according
to the technical specs provided.
Damages are not covered by the warranty that are
due to causes such as:
Wear due to improper use.
Partial or total disassembly.The tool’s shell
must be disassembled only by personnel
authorised by the official distributor.
Damage due to overloading.
Usage of incorrect or incompatible accessory.
Bad maintenance from the operator or any
other third party.
Wear that was induced by external factors or
rogue particles (dust, debris etc.)
The warranty is valid only when:
Do not dispose of electrical
machines as unsorted municipal
waste, use separate collection
facilities.
Contact your local government
collection systems for informa-
tion regarding the collection systems available.
I f electrical machines are disposed of in landfills
or dumps, hazardous substances can leak into
the groundwater and get into the food chain,
damaging your health and well-being. When
replacing old machines with new ones, the retailer
will be happy to take back your old machine for
disposal.
In case there is a need for a repair after the war-
ranty period has expired, we will provide the best
possible attention to repair the tool successfully.
8. Disposal
7. Repair / Servicing
9. Declaration of Conformity
Herewith declares that:
T he Angle Grinder with CODE: 8506 and distinctive title:
TG125K under the brand KRAUSMANN (Description: An-
gle grinder, 230V~50Hz, 900W, no load speed 12000min-
1, Ø125mm, with restart switch, VDE plug, in color box
packing), is designed in conformity with provision of the
Directive 2006/42/EC and the following manufacturing
standards:
EN60745-1:2009+A11:2010, EN60745-2-
3:2011+A2:2013+A11:2014 +A12:2014+A13:2015
EK9-BE-88:2020
.
Y ear in which “CE” marking was affixed: 2020
Date: June 23rd, 2020
PAPADEAS S.A.
4-6 Iroon 1912 St., 13671, Acharne, Greece
Authorized Representative
* Accessories and contents may change from the production
factory without any warnings, in that case the company bears
no responsibility.