Troubleshooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following coorective steps:
P R O B L E M
C A U S E
A C T I O N
Leakage under the
handle
Bonnet nut (12) has
come loose
Remove the cover button (16).
Lossen screw (15) with hex
wrench (17). Remove the
handle (14). Unscrew cap (13)
(by hand only). Tighten bonnet
nut (12) with an adjustable
wrench
The aerator has an
irregular or reduced
The aerator is dirty or
Remove the aerator and
check for debris.
Ensure that the rubber
washer is properly installed.
completely
Cartridge may need to
be adjusted or replaced
Rem
Lossen screw (15) with hex
wrench (17). Remove the
handle (14). Unscrew cap (13)
(by hand only). Tighten bonnet
nut (12) with an adjustable
wrench. Remove the cartridge
(11). Check for cracks
ove the cover button (16).
There is leaking from the
sink drain at the base of
the sink.
The sink has a rough or
irregular surface.
Apply additional silicone
sealant to the beveled side of
and test for leaks
water.
hose connectors is dirty. water valve and unscrew the
hose connectors from water
supply lines. Clean the
washer in the water lines with
hot water, removing any debris
or calcium build up
8
