background image

3

www.kraususa.com

INSTALLUS 1 May 2017

The following instructions apply only to Kraus-recommended sink mounting specification A and B.

 

1. 

Position undermount sink template on countertop, centered within the sink base cabinet unit. Make sure to provide    

           adequate clearance from the countertop backsplash, with room for mounting faucet and fittings behind the sink.  

           Avoid any potential interference with cabinet bracing.

2. 

Countertop cut-out may be prepared by using either the paper template included within the sink carton, 

 

 or referencing the .dxf file found on www.kraususa.com

2A.  Trace a line around the paper template. Cut along the inside of this line to create opening in countertop.

2B.  Select the dxf file for the Kraus model purchased. CNC machine the countertop cut-out based on this dxf file.

3. 

Locate and drill the sink fastener mounting holes (following the countertop manufacturer’s instructions).  

            Type of fasteners should be recommended by countertop supplier.

4. 

Loosely fasten sink mounting clips to countertop.

5. 

Apply a bead of silicone caulking (not included) evenly along the sink flange.

6. 

Position and align sink to the countertop. Tighten fasteners until sink mounting clips are snug against the sink flange.

7. 

Check alignment of sink to cut-out opening, and adjust if necessary. Tighten fasteners evenly. DO NOT overtighten.

8. 

Wipe up and remove any excess silicone from the countertop cut-out edge.

Installation Instructions

KD1US17B, KD1US25B, KD1US33B and KD1UD33B

Kraus Recommended Optional Accessories

NOTE

:

 Kraus recommends using a high-quality dish grid with your stainless steel sink to protect the bottom of the basin

              from wear and tear.  To ensure the proper fit, we recommend the following matching grids:

 

DEX™ SERIES  

STAINLESS STEEL SINK

MODEL NO.

RECOMMENDED

 DISH GRID

MODEL NO.

1.

 

17” Undermount Single Bowl 

Stainless Steel Bar Sink

 
 

KD1US17B

 

15” Stainless Steel  

Kitchen Sink Grid

 
 

BG1517

2.

 

25” Undermount Single Bowl 

Stainless Steel Kitchen Sink

 
 

KD1US25B

 

23” Stainless Steel  

Kitchen Sink Grid

 
 

BG2317

3.

 

33” Undermount Single Bowl 

Stainless Steel Kitchen Sink

 
 

KD1US33B

 

31” Stainless Steel  

Kitchen Sink Grid

 
 

BG3117

4.

 

33” Undermount Double Bowl 

 Stainless Steel Kitchen Sink

 
 

KD1UD33B

 

15” Stainless Steel  

Kitchen Sink Grid

 
 

BG1517 (x) 2

Summary of Contents for Bolden KPF-1610





















Reviews: