Prior to Installation:
•
Make sure you have all necessary parts by checking the diagram and parts list. If
any part is missing or damaged, please contact Kraus Customer Service at 800-775-
0703 for a replacement
•
•
Pre-drilled countertop hole size requirement: 1-3/8”(min)
•
Max countertop thickness: 3-1/2”
Tools you will need:
13
Wrench
Phillips Screwdriver
Safety Goggles
Silicone Sealant
(optional)
Pipe Tape
3
Turn off the hot and cold water lines at the angle stops and turn on the old faucet
to release any built-up pressure
Read all instructions and safety warnings and ensure you have all tools, parts,
and equipment necessary for a safe installation.
•
Care & Maintenance
*
To keep the product clean & shining, follow the steps below:
1.
Rinse with clean water & dry with a soft cloth
2.
Do not clean with soaps, acid, polish, abrasives or harsh cleaners
3.
Do not use cloth with a coarse surface
4.
Unscrew the aerator and clean when necessary
*
This installation manual is subject to change without further notice.
ACID
STOP
