Kraun KW.05 User Manual Download Page 25

Page: 25 / 39

Manual

www.kraun.com

3.11. Sd-Card settings

The IP camera provides the recording of the video files into a standard Micro SD-Card. Since this recording

is directly to the SD-Card, there is no network packets loss problem when recording to remote device

through internet.

notice

: when the IP camera is doing SD-Card recording, this is counted as one video user. Please refer to

appendix B about allowed maximum video users.

1. If the “Always Recording” is selected, the system will start to record to the SD-Card immediately

and keep recording always. If the “Schedule Recording” is selected, the system will do the SD-Card

recording according to the “scheduling” in section 3.12. “Disable Recording” will disable this SD-Card

recording.

2. When doing the SD-Card recording, the system will check the free disk space of the SD-Card. If the

disk space is full (no free disk space), the system will do “Circular recording”( overwrite the oldest

recorded files in the SD-Card ) or “Stop recording” as selected.

3. SD-Card status – the SD-Card inserted or removed status is displayed here.
4. SD-Card files – as shown in fig.3-14, all the recorded video files with information including file name

and recorded time are listed in this page under the directory of each date. The recorded file could be

separately downloaded or deleted on this page.

Figure 3-16: SD-Card Settings page

Summary of Contents for KW.05








































Search results

Summary of Contents for KW.05

Reviews:

Related manuals for KW.05

Brands by name

Popular brands

Kraun KW.05, User Manual

Search results

Summary of Contents for KW.05

Reviews:

Related manuals for KW.05

Brands by name

Popular brands