Kraun KR.2N User Manual Download Page 37 | Manualshive

Page: 37 / 55

background image

KR.2N

Wireless-N Broadband Router 300Mbps / 2T2R

37 www.kraun.it

8.5 DMZ Host

The DMZ function is to allow one computer in LAN to be exposed to the Internet for a special-
purpose service as Internet gaming or videoconferencing.

DMZ Host IP Address:

The IP address of the computer you want to expose.

Enable: Click the checkbox to enable the DMZ host.

IMPORTANT: The Device placed in the DMZ is completely exposed to the
Internet and there is no Firewall protection. Please make sure your have
alternative security precautions in place before moving a PC or other network
device into the DMZ.

8.6 UPnP Setting

Your Router supports the latest Universal Plug and Play functionality. This functionality is
available with Windows XP or devices or software that supports UPnP. With the UPnP
function a host in the LAN can request the router to process some special port switching so as
to enable a host outside to visit the resources in the internal host.

Enable UPnP: Click the checkbox to enable UPnP functionality.

«
...
35
36
37
38
39
...
»

Summary of Contents for KR.2N
























































Reviews:

No comments

Related manuals for KR.2N

tm-g5240 - T-mobile Hotspot Wireless

Brand: T-Mobile Pages: 2

EN-SLX 9640-24S-12C

Brand: Extreme Networks Pages: 113

Brand: LevelOne Pages: 33

Brand: Ubiquiti Pages: 22

Brand: NetComm Pages: 55

F5D7132 - Wireless G Universal Range Extender/Access Point

Brand: Belkin Pages: 2

Brand: versa Pages: 103

Brand: IgniteNet Pages: 7

Brand: Deliberant Pages: 69

Rocket5AC R5AC-PTP

Brand: Ubiquiti Pages: 13

Brand: Alfa Network Pages: 1

Brand: Well Straler Pages: 16

TL-WR340G - Wireless Router

Brand: TP-Link Pages: 2

Brand: TP-Link Pages: 70

54Mbps Wireless Access Point TL-WA501G

Brand: TP-Link Pages: 43

Brand: TP-Link Pages: 55

Brand: XtendLan Pages: 23

Brand: EnGenius Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands