Important Safeguard
When using electrical appliances, basic safety precautions should always be followed:
1.
Read all instructions.
2.
To protect against risk of electrical shock, do not put switch or plug in water or any other
liquid.
3.
Children should be supervised in order to make sure they do not hurt themselves.
4.
Before taking off parts or cleaning the appliance, unplug the power cord from the wall outlet
so the appliance is not in use.
5.
Keep hot lamp shade and bulb separate.
6.
Do not operate any appliance with a damaged cord, plug, or after the appliance
malfunctions/damaged.
7.
If needed, call authorized service facility for possible examination, replacement, electrical
adjustment or repair.
8.
Connecting type of power soft cord is “Y”. If the power cord is damaged, have it changed by a
profession.
9.
Do not let the power cord hang over edge of table, counter, or touch hot surfaces.
10.
Never clean the heat lamp with wet material while appliance is on.
11.
For operation use, this product must be placed on a flat table/counter.
12.
Handle with care during the transportation of this product.
13.
Do not use outdoors.
Assembly Instructions
1 & 2 Bulb Warmer:
1.
Put the lamp base (1) on flat level surface.
2.
Insert the middle lamp frame (2) into the aluminum tube (3) of the base frame.
3.
Insert the upper lamp frame (4) into the middle frame and fix them by screw (5).
4.
Adjust the total height of the warmer and tighten in place by screwing the thread nut (6).
5.
Put on the food tray (7) in place.
6.
Plug the power cord and turn on the switch. Check the bulb to make sure the appliance is
ready for use.