Description
400 V / 50 Hz
Electrical connection
The machine is supplied with an electrical power cord with plug.
The mains plug must be fitted to a standard grounded socket with a
30mA
residual
current operated device. The socket must be protected with a
16A delay
action
fuse on the mains side.
KRÄNZLE quadro = 400 Volt / 50 Hz
(phase-sequence not significant)
When using an extension cable, this must have a grounded lead which is properly
connected to the socket. The conductors in the extension cable must have a
minimum cross section of 1.5 mm². Plug connections must be of a spray-proof
design and may not be located on a wet floor.
CAUTION !
The use of extension cables which are too long may lead to malfunctions and start
up difficulty.
When using a cable drum, always keep the cable wound as far as possible.
8
Summary of Contents for quadro 1000 TS
