10
11
Functional details / Putting into operation
Functional details / Putting into operation
Setting the push bar
2.
The push bar can be set to the desired
working height. This is easier on your
back.
Setting the side brushes
1.
The hand wheel at the side brush arm
sets the optional pressure against the
ground for each side brush. It must be
adjusted to the local situations until
a good sweeping result is achieved.
2.
Turning the hand wheel clockwise lifts
the side brush and reduces pressure on
the ground.
3.
Turning the hand wheel counterclock-
wise lowers the side brush and increases
pressure on the floor.
1.
First fold the push bar up.
If the pressure of the side brush is set too high, pushing requires a
greater strength and the bristles of the side brush wear more quickly.
The best sweeping result is achieved at 2.5 km/h. This is the normal
walking speed of a pedestrian.
1.
The two side brushes turn inwards while
moving and send the swept-up material
to the sweeping roller. A caster makes
the Kränzle Colly 800 easily steerable,
always keeps it at an even distance from
the ground and ensures a completely
even sweeping effect this way.
Dustpan principle
The Colly 800 works with a sweeping roller and two side brushes. When moving
forward, the sweeping roller and the side brushes are powered. The smoothly
moving Kränzle Colly 800 takes up, e.g., dust, cigarette stubs, leaves, smaller
plastic and metal parts, in its large waste bin securely thanks to its double
bristle sets (alternating hard and soft bristles).
2.
The side brushes are pre-set to 7.5 mm
in the factory.
