manualshive.com logo in svg

Kranzle B170T, Operating Manual

Share
Download
Kranzle B170T Operating Manual Download Page 11

11

Water

5. Maximum induction 

height 2.5 m - see tech-

nical data  

on page 2.

Please make sure that the filter is

 

clean before using your high pressure 

cleaner.

4. The machine can be connected  

to a pressurised water line with cold 

or up to 70 °C hot water (see page 2).

 

Ensure that the water supply ist clean 

when sucking from external sources. 

The hose cross section must be 

at least 1/2“ = 12.7 mm (free

 

passage). Filter must 

always be clean.

Preparation for use

Adjusting the pressure

This is accomplished by 

turning the handwheel. 

The default setting is 

maximum pressure.

1. Switch off the machine 

2. Cut off the water supply 

3. Open the spray gun briefly until the pressure is released

 

4. Apply the safety catch on the spray gun 

5. Remove the water hose and high pressure hose 

6. Drain the pump: switch on the motor for approx. 20 seconds 

7. Winter: store the pump in rooms above 0° C 

8. Clean the water filter

To shut down the pump:

Summary of Contents for B170T

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands