Krampouz GGCIC30AA, Instructions For Use Manual

Page: 13 / 36

- 13 -
Commercial description of appliance: GGCIC4 (model with 2 burners).
6 kW PLANCHA – TECHNICAL SPECIFICATIONS, CAT II E+3+ APPLIANCE
Connection to gas
The supply configuration of the appliance is marked on the data plate stuck to the rear of the
appliance.
If you have to change the gas configuration of your appliance, refer to the
Adjustment chapter page
15.
- The plancha must be connected from the fitting at the rear of the appliance with a metal hose in
compliance with NF D 36121 for natural gas and NF D 36125 for 3
rd
family Butane/propane gas.
- Check the air tightness of the fitting with soapy water.
- Never test the air tightness with a flame.
BUTANE/PROPANE
Connection for use of your appliance in category I3
For G30 Butane gas use an NF 28 mbar safety regulator
- NFD36-125 metal hose/length: 1 m
- XPD36-112 hose/length: 1 m
G31PROPANE
Use a NF 37 mbar safety regulator
- Nipple type end pieces are prohibited
- NFD36-125 metal hose/length: 1 m
- XPD36-112 hose/length: 1 m
NATURAL GAS
Connection for use of your appliance in category 12E+
For G20 natural gas
- Butane nipple type end pieces are prohibited
- NFD36-121 metal hose
- NFD36-103 hose
TYPE
of GAS
Pressure
in mbar
Injector
marker
Adjustment value
of venturi
see FIG.2 page 5
Rated output in
kW
Rated consumption
Reduced
output in
Watt
Natural
gas
G20 20 1.35 1 mm 6000 W 630 l/h 3200 W
3rd family gas
Butane G30 28/30 0.95 5 mm 6000 W 456 g/h 3200 W
Propane G31 37 0.95
5 mm 6000 W
456 g/h 3200 W