WP-SW2-EN7
Quick Start
P/N: 2 9 0 0 - 3 0 1 5 8 1 QS
Rev: 3
Scan for full manual
WP-SW2-EN7 Quick Start Guide
This guide helps you install and use your
WP-SW2-EN7
for the first time.
Go to
www.kramerav.com/downloads/WP-SW2-EN7
to download the latest user manual and check if
firmware upgrades are available.
Step 1:
Check what’s in the box
WP-SW2-EN7
4K AVoIP Encoder
Frame (or frame set) and faceplate
Installation accessories
1 Quick start guide
Step 2: Get to know your WP-SW2-EN7
# Feature
Function
1 HDMI IN Connector
Connect to an HDMI source.
2 USB IN
Port
Connect to a USB-C source. This port can receive video, USB data and RS-232 commands.
When powered by a Kramer 20V power supply (optional), charges sources that support USB
Power Delivery 2.0 up to 60W.
3 HDMI LED
Lights Green
HDMI input is selected, HDMI is connected and signal is received.
Flashes Green
HDMI input is selected, HDMI is connected and no signal is received.
Off
The HDMI is not selected or not connected.
4 USB LED
Lights Green
USB-C input is selected, USB-C is connected and signal is received.
Flashes Green
USB-C input is selected, USB-C is connected, no signal is received.
Off
USB-C is not selected or not connected.
5 ON LED
Flashes Red
On fallback address
acquiring, device ‘ON’ LED flashes continuously in
slow 0.5/10sec cadence.
Lights Green
When power is on.
Flashes Green Fast
FW is downloaded in the background.
Flashes Green Very
Fast (for 60sec)
A device identification command is sent (Flag me).
