Front Panel
– Before Assembly
#
Feature
Function
SETUP DIP-switches
Do not change the default DIP-switch settings (located on the front
panel, behind the frame)
6
DIP-switch 2
N/A
Must be set to OFF (up).
7
DIP-switch 1
Compression
Must be set to ON (down).
Step 3: Install the WP-872xr
Insert the device into the in-wall box (note
THAT
first you need to connect the DGKAT 2.0 cable and power) and connect the
parts as shown in the illustrations below:
US-D Version
EU/UK Version
DECORA® design frames are included in US-D models.
DECORA® is a registered trademark of Leviton Manufacturing Co., Inc.
We recommend that you use any of the following standard 1 Gang in-wall junction boxes (or their equivalent):
•
US-D
: 1 Gang US electrical junction boxes.
•
EU
: 1 Gang in-wall junction box, with a cut-hole diameter of 68mm and depth that can fit in both the device and the
connected cables (DIN 49073).
•
UK
: 1 Gang in-wall junction box, 75x75mm (W, H) and depth that can fit in both the device and the connected cables
(BS 4662 or BS EN 60670-1 used with supplied spacers and screws).
