![background image](http://html.mh-extra.com/html/kramer/wp-571/wp-571_user-manual_2002010010.webp)
8
WP-571/WP-572 - Defining the WP-571 and WP-572
4.2
Defining the WP-572
The Kramer WP-572 HDMI Line Receiver accepts an encoded signal over TP
cable from the WP-571 (or any other DGKat compatible transmitter), decodes it
and converts it to an HDMI output.
The WP-572 is available in the following versions:
•
US (see
Section 4.2.1
)
•
EU (see
Section 4.2.2
)
4.2.1
WP-572 US Version
Figure 3
defines the front and rear panels of the WP-572.
Figure 3: WP-572 HDMI Line Receiver US Front and Rear Panels
#
Feature
Function
1
ON LED
Indicates the following:
•
Lights red when receiving power only
•
Lights orange when power and either input or output are attached
•
Lights green when both an active input and output are attached
Note
: If no input is connected to the transmitter the device goes into
the power save mode automatically (see
Section 3.3
)
2
HDMI OUT Connector
Connect to the HDMI acceptor
3
2-pin Terminal Block
Connect to the supplied 12V DC power adapter (see
Section 3.3
)
4
RJ-45 CAT-5
Connector
Connect to the DGKat transmitter using DGKat cable (see
Section 5
)
Summary of Contents for WP-571
Page 15: ......