Using the WP-220 XGA/Audio/Video Line Driver
7
5.2 Operating the WP-220 XGA/Audio/Video Line Driver
To operate your
WP-220
XGA/Audio/Video Line Driver
:
1. Connect an XGA
1
source (for example, a laptop’s digital graphics card) to
the Input HD15F connector and to the AUDIO Input
3.5mm mini jack,
for example, using a Kramer C-GMA/GMA cable (VGA HD15M +Audio
jack to VGA HD15M +Audio jack)
2
.
Alternatively, you can connect an XGA
1
source to the Input HD15F
connector, and a separate audio source to the AUDIO Input.
2. Connect a composite video source (for example, a VCR) to the CV IN RCA
connector and to the LINE AUDIO LEFT and RIGHT RCA connectors.
3. Adjust
3
the XGA
1
cable compensation equalization level and/or the CV
cable compensation equalization level/output signal level, if required, as
well as the right
3
and/or left
3
line audio output signal levels.
1 Can be used for any RGBHV resolution (for example, VGA, XGA, UXGA and so on)
2 Not supplied. The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com (click “Cables
and Connectors” in the Products section)
3 Insert a screwdriver into the small hole and carefully rotate it, trimming the appropriate level
