Kramer WAV-1R, User Manual

Page: 5 / 12

Wall Plate Series – Overview 3
3 Overview
This user manual describes the following wall plate inserts:
• WAV-5 and WAV-5C (see
U
Section 3.1
U
)
• WAV-3 , WA-1H , WAV-1R , and WAV-1RP (see
U
Section 3.2
U
)
3.1
4B
WAV-5 and WAV-5C Wall Plate Inserts
The WAV-5 (see
U
Section 3.1.1
U
) and WAV-5C (see
U
Section 3.1.2
U
), are available in
three versions: one for Belgium and Germany, one for England and Europe (except
Belgium and Germany), and one for the United States.
3.1.1 WAV-5
The WAV-5 is a 1 gang wall plate insert (see
U
Figure 1
U
) with pass through
connectors for:
• Computer graphics video on a 15-pin HD connector and unbalanced stereo
audio on a 3.5mm jack connector flush against the front panel, and a short
flexible 12cm (4.7”) cable with a 3.5 mini jack connector at the rear
• Video (composite or SDI) on a yellow RCA connector and unbalanced stereo
audio on RCA connectors (white for L and red for R)
3.1.2 WAV-5C
The WAV-5C is a 1 gang wall plate insert (see
U
Figure 2
U
) with pass through
connectors and 5 cables with BNC connectors (colored red (R), green (G), blue (B),
black (Vertical sync) and yellow (Horizontal sync)) on the rear included for:
• Computer graphics video on a 15-pin HD connector and unbalanced stereo
audio on a 3.5mm jack connector flush against the front panel, and a short
flexible 12cm (4.7”) cable with a 3.5 mini jack connector at the rear
• Video (composite or SDI) on a yellow RCA connector and unbalanced stereo
audio on RCA connectors (white for L and red for R)