Kramer Electronics Ltd.
VW-4
– Protocol 3000
32
Function Description
Syntax
Parameters/Attributes
Example
ETH-PORT?
Get Ethernet port
protocol.
COMMAND
#ETH-PORT?
port_type
<CR>
FEEDBACK
~nn@ETH-PORT
port_type
,
port_id
<CR><LF>
port_type
– TCP/UDP
0
– TCP
1
– UDP
port_id
– TCP / UDP port number
(0
– 65535)
Get the Ethernet port protocol
for UDP:
#ETH-PORT?
1
<CR>
FACTORY
Reset device to factory
default configuration.
This command deletes
all user data from the
device. The deletion can
take some time.
Your device may require
powering off and
powering on for the
changes to take effect.
COMMAND
#FACTORY
<CR>
FEEDBACK
~nn@FACTORY
ok
<CR><LF>
Reset the device to factory
default configuration:
#FACTORY
<CR>
HDCP-MOD
Set HDCP mode.
Set HDCP working
mode on the device input:
HDCP supported -
HDCP_ON [default].
HDCP not supported -
HDCP OFF.
HDCP support changes
following detected sink -
MIRROR OUTPUT.
When you define
3
as the
mode, the HDCP status is
defined according to the
connected output in the
following priority: OUT 1,
OUT 2. If the connected
display on OUT 2
supports HDCP, but OUT
1 does not, then HDCP is
defined as not supported.
If OUT 1 is not connected,
then HDCP is defined by
OUT 2.
COMMAND
#HDCP-MOD
stage
,
stage_id
,
mode
<CR>
FEEDBACK
~nn@HDCP-MOD
ok
<CR><LF>
stage
– Input/Output
0
– Input
1
– Output
stage_id
– Input number:
1
– HDMI
Output number
1
– HDMI 1
2
– HDMI 2
3
– HDMI 3
4
– HDMI 4
2
– HDBT
mode
– HDCP mode
Input:
0
– Off
1
– On
Output:
2
– Follow input
3
– Follow output
Set the input HDCP-MODE of
the HDMI input to Off:
#HDCP-MOD
0
,
1
,
0
<CR>
HDCP-MOD?
Get HDCP mode.
Set HDCP working
mode on the device input:
HDCP supported -
HDCP_ON [default].
HDCP not supported -
HDCP OFF.
HDCP support changes
following detected sink -
MIRROR OUTPUT.
COMMAND
#HDCP-MOD?
stage
,
stage_id
<CR>
FEEDBACK
~nn@HDCP-MOD
stage
,
stage_id
,
mode
<CR><LF>
stage
– Input/Output
0
– Input
1
– Output
stage_id
–
Input number:
1
– HDMI
Output number
1
– HDMI 1
2
– HDMI 2
3
– HDMI 3
4
– HDMI 4
mode
– HDCP mode
Input:
0
– Off
1
– On
Output:
2
– Follow input
3
– Follow output
Get the input HDCP-MODE of
the HDMI input:
#HDCP-MOD?
0
,
1
<CR>
HDCP-STAT?
Get HDCP signal status.
io_mode =1
– get the
HDCP signal status of the
sink device connected to
the specified output.
io_mode =0
– get the
HDCP signal status of the
source device connected
to the specified input.
COMMAND
#HDCP-STAT?
io_mode
,
in_index
<CR>
FEEDBACK
~nn@HDCP-STAT
io_mode
,
in_index
,
status
<CR><LF>
io_mode
– Input/Output
0
– Input
1
– Output
io_index
– Number that indicates
the specific number of inputs or
outputs
Input number:
1
– HDMI
Output number
1
– HDMI 1
2
– HDMI 2
3
– HDMI 3
4
– HDMI 4
status
– Signal encryption status -
valid values On/Off
0
– HDCP Off
1
– HDCP On
Get the output HDCP-STATUS
of IN 1:
#HDCP-STAT?
0
,
1
<CR>
HELP
Get command list or help
for specific command.
COMMAND
#HELP
<CR>
#HELP
cmd_name
<CR>
FEEDBACK
1. Multi-line:
~nn@Device
cmd_name
,
cmd_name…
<CR><LF>
To get help for command use: HELP (COMMAND_NAME)
<CR><LF>
~nn@HELP
cmd_name:
<CR><LF>
description
<CR><LF>
USAGE:usage
<CR><LF>
cmd_name
– Name of a specific
command
Get the command list:
#HELP
<CR>
To get help for
AV-SW-TIMEOUT:
HELP
av-sw-timeout
<CR>