Kramer VSM-4x4X, User Manual

Page: 42 / 80

Kramer Electronics Ltd.
VSM-4x4X
– Using Embedded Web Pages
40
2. Set the video source, enable/disable video, enable/disable label, set the aspect ratio and
set the border color and width.
3. Click RESET TO DEFAULT to reset settings to factory default.
Picture settings are defined.
Operating and Controlling the Video Wall Mode
The Video Wall mode includes 2x2 and 1x4 configurations. To access Multi-View
configurations, see
Selecting Device Operation Mode on page 18 .
In the 2x2 mode, one large window and 3 other smaller images, either on the side (side) or on
the lower area of the screen (bottom) are displayed, while maintaining aspect ratio.
Perform the following actions:
•
Operating in the 2x2 Video Wall Mode on page 40 .
•
Operating in the 1x4 Video Wall Mode on page 41 .
•
Adjusting Bezel Correction on page 43 .
Operating in the 2x2 Video Wall Mode
To operate VSM-4x4X in the 2x2 video wall mode:
1. Click AV on the Navigation List. The AV Settings page appears ( Figure 12 ).
2. Select 2x2 configuration (see Selecting Device Operation Mode on page 18 ). The 2x2
window appears:
Figure 43: Video Wall Mode
– 2x2 Video Wall Configuration