VS-88UT Quick Start (P/N: 2900-300582QS REV 1)
P/N:
2 9 0 0 - 3 0 0 5 8 2 QS
Rev:
1
Scan for full manual
VS-88UT Quick Start Guide
This guide helps you install and use your
VS-88UT
for the first time.
www.kramerav.com/downloads/VS-88UT
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check w
hat’s in the box
VS-88UT
8x8 HDMI/HDBT Matrix Switcher
1 Power cord
1 Quick start guide
1 Set of rack ears
4 Rubber feet
Step 2: Get to know your VS-88UT
#
Feature
Function
1
ON LED
Lights when receiving power.
2
STATUS LED
Multi-color LED lights upon startup, flashes green upon boot and lights green when ready to use. The
LED lights red to indicate internal errors.
#
Feature
Function
Controller Functionality
3
IR IN 3.5mm Mini Jack
Connect to an external IR receiver (1 and 2).
4
IR OUT Terminal Block Connectors
Connect to IR emitter cables (from 1 to 4).
5
GPI/O Terminal Block Connectors
Connect to various analog and digital sensors (from 1 to 4).
6
RELAYS Terminal Block Connectors Connect to low-voltage relay-driven devices (from 1 to 8).
7
RS-232 Terminal Block Connectors
Connect to RS-232 controlled devices (from 1 to 4).
8
RS-485 Terminal Block Connector
Connect to the RS-485 detachable terminal block on a switcher or PC.
Pins B (-) and A (+) are for RS-485; Pin G may be connected to the shield (if required).
