![background image](http://html1.mh-extra.com/html/kramer/vs-88uhd/vs-88uhd_user-manual_2001458015.webp)
Kramer Electronics Ltd.
VS-88UHD – Operating VS-88UHD via Front Panel Buttons
13
On the front panel buttons:
An illuminated input button means that an active digital audio signal is detected on that
input that supports LPCM audio.
A dark input button means that there is no active digital audio source on that input (or
that the source is DVI).
A flashing input button means that a Dobly digital audio, Dobly-TrueHD audio, or AC-3
audio signal from a DVD player is detected on that input.
An illuminated output button means that a display that supports LPCM audio is
connected to that output.
A dark button means either that the display that is connected does not support audio
or that a display is not connected at all.
A flashing output button means that a display is connected that does not support
LPCM.
On the 7-segment display:
“
0
” under an output number indicates that the audio output
is muted.
“.” u
nder an output number indicates that the HDMI output port is in ARC mode.
Any digit shows the HDMI audio input switching state.
2. While
D-AUDIO
is on, select an output button (for example, 6) and then an input button
(for example, 5). HDMI audio input 5 is routed to HDMI audio output 6 and on the
7-segment display, INPUT 5 appears under OUTPUT 6.
When switching you can also press:
An output button (1 to 8) and then
OUT (MUTE)
to mute the selected output (turns 0).
ALL
(instead of an output button) and then an input button to route the selected input
to all the outputs.
All the 7-segment display LEDs flash and then display the selected input.
Switching the Video and the Audio Signal Simultaneously
You can select the audio signal to switch to the output together with the video signal.
To switch the audio and video signals together to an output:
1. Press
D-AUDIO
and
VIDEO
simultaneously.
The button illuminates and the 7-segment display
shows the current IN-OUT video
status.
2. Press an
OUT (MUTE)
button (1 to 8).
The 7-segment display LED, under the selected output, flashes.
Press
ALL
(instead of an output button) to route the selected input to all the outputs. All
the 7-segment display LEDs flash.
3. Press an
IN (PATTERN)
button (1 to 8).
The selected video and audio input is switched to the selected output (or to all the
outputs if
ALL
was pressed instead) and the 7-segment display shows the current
status.
Проконсультироваться
и
купить
данное
оборудование
вы
можете
в
компании
«
АНД
-
Системс
»
адрес
: 125480,
г
.
Москва
,
ул
.
Туристская
,
д
.33/1; site: https://andpro.ru
тел
: +7 (495) 545-4870 email: [email protected]
При
обращении
используйте
промокод
AND-PDF
и
получите
скидку
.