Kramer VS-88HC, User Manual

Page: 10 / 49

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VS-88HC 8x8 Home Entertainment Matrix Switcher
6
Table 2: Front Panel VS-88HC 8x8 Home Entertainment Matrix Switcher Features
# Feature Function
1 IR Receiver The red LED is illuminated when receiving signals from the infra-red remote
control transmitter
2 POWER Switch Illuminated switch for turning the unit ON or OFF
3 OUTPUT Select the output to which the input is switched (from 1 to 8)
4
SELECTOR
Buttons
1
INPUT Select the input to switch to the output (from 1 to 8)
5 TAKE Button Pressing TAKE toggles the mode between the Confirm mode
2
and the At
Once mode (user confirmation per action is unnecessary). When the TAKE
button flashes (in the confirm mode), pressing it implements pending actions
6 STATUS 7-segment
Display
Displays the selected video INPUT switched to the OUTPUT (marked above
each input)
3
7 LOCK Button Disengages/engages the front panel switches
8 DELAY Button Press to toggle the output 2 DELAY feature between:
On – activates the delay
Set – sets the delay time and
Off – turns off the delay (see section 8.6)
9 STO /+ Button Pressing STO, followed by an output button, stores the current setting
4
; when
adjusting the audio delay, press to increase the delay time
10 RCL /- Button Pressing the RCL button and the corresponding OUTPUT key recalls a setup
from the non-volatile memory; when adjusting the audio delay, press to
decrease the delay time
11 AFV Button When illuminated
5
, the subsequent actions relate to the video and audio
channels. The audio channels follow the video channels. Press to toggle
12 AUDIO Button When illuminated
6
, the subsequent actions relate to audio. Press to toggle
13 VIDEO Button When illuminated
6
, the subsequent actions relate to video. Press to toggle
14 ANALOG AUDIO
OUTPUT LEVEL
Trimmers
7
Turn to adjust the output signal levels (from 1 to 8)
15 OFF Button An OFF-OUTPUT combination disconnects that output from the inputs; an
OFF-ALL combination disconnects all the outputs
16 ALL Button Pressing ALL followed by an INPUT button, connects that input to all outputs
8
Figure 2 and Table 3 define the
VS-88HC
8x8 Home Entertainment Matrix
Switcher rear panel:
1 The digital audio inputs are switched only to digital audio outputs and the analog audio inputs are switched only to analog
audio outputs
2 When in the Confirm mode, the TAKE button flashes
3 Also displays the audio sample rate, the delay time and so on. Refer to section 8.1
4 For example, press STO and then the OUTPUT button # 3 to store in setup # 3
5 When in AFV mode
6 When in audio breakaway mode, either the AUDIO or the VIDEO button is illuminated and the AFV button is OFF
7 Insert a screwdriver into the hole and carefully rotate it, to trim the level
8 For example, press ALL and then input button # 2 to connect INPUT 2 to all the outputs