![background image](http://html1.mh-extra.com/html/kramer/vs-88dvi/vs-88dvi_user-manual_2001434017.webp)
14
VS-88DVI - Operating the VS-88DVI
6.4.2
Acquiring an EDID from Several Sets of Inputs and Outputs
To acquire the EDID from several sets of inputs and outputs (for example, OUT 1
to IN 1 and OUT 6 to IN 3), do the following:
1. Enter the EDID mode:
Turn ON the VS-88DVI
Connect the required acceptors to the outputs from which you want to
acquire the EDID
Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.
2. Set the first input output pair (for example, OUT 1 to IN 1)
Press the SELECT IN 1 button to which the first EDID is copied
The selected input number 1 flashes on the display
Press the SELECT OUT 1 button from which the EDID is acquired
Press the SELECT IN 1 button again.
The IN 1 button ceases to flash
3. Set the second input output pair (for example, OUT 6 to IN 3)
Press the SELECT IN 3 button to which the next EDID is copied
The selected input number 3 flashes on the display.
Press the SELECT OUT 6 button from which the second EDID is
acquired
Press the SELECT IN 3 button again.
The IN 3 button ceases to flash
4. Press the SELECT IN 1 and IN 3 buttons to which you want to copy the
EDID.
5. Make sure that the relevant input numbers flash on the display.
6. Press the EDID button.
The process is complete when the display returns to normal.
Summary of Contents for VS-88DVI
Page 2: ......
Page 13: ...10 VS 88DVI Connecting the VS 88DVI Figure 3 Connecting the VS 88DVI 8x8 DVI Matrix Switcher...
Page 27: ......