Kramer Electronics Ltd.
VS-88DT
– Connecting the VS-88DT
9
Connecting the VS-88DT
Switch off the power to all devices before connecting them to your
VS-88DT
. After connecting your
VS-88DT
, connect its power and then switch on the power to
the other devices.
Figure 3: Connecting the
VS-88DT
HDMI/HDBT Matrix Switcher
To connect the VS-88DT as illustrated in the example in
1. Connect the HDMI sources, (for example, Blu-ray disc players) to the HDMI In 1 and In 2
connectors.
2. Connect an external IR sensor to the In 4 IR In 3.5mm mini jack.
3. Connect the Out 1 IR 3.5mm mini jack to an external IR transmitter.
4. Connect the Out 4 HDMI connector to an HDMI acceptor, (for example, a display).
5. Connect the Out 3 TP RJ-45 HDBT connector to a compatible HDBT receiver, (for
example, the
TP-580Rxr
), and connect the HDMI output of the
TP-580Rxr
to a display.
6. Connect the Out 7 TP RJ-45 HDBT connector to a compatible HDBT receiver, (for
example, the
TP-588D
), and connect the DVI output of the
TP-588D
to a display.
7. Connect a controller via either RS-232 or a LAN to the Ethernet RJ-45 connector.