Kramer VS-84HN, User Manual

Page: 8 / 34

VS-84HN - Overview 5
VS
-8
4
HN
–
Ov
e
rv
ie
w
5
Figure 1: VS-84HN 8x4 HDMI Matrix Switcher Front Panel
# Feature Function
1 IR Indication LED Lights yellow when receiving signals from the infrared remote control transmitter
2 IR Receiver Signal receiver for the infrared remote control transmitter
3 POWER LED Lights when the device is turned on
4 ALL Button Press followed by an input button to connect the selected input to all outputs
For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs
5 OFF Button Press after pressing an output button to disconnect the selected output from the inputs. To
disconnect all the outputs, press ALL followed by OFF
6
SELECT Buttons
OUT (1 to 4) Press to select an output to switch followed by an input (also used for storing machine
setups (see
Section
6.3
)
7 IN (1 to 8) Press to select the input to switch after selecting an output (also used for storing machine
setups (see
Section
6.3
)
8 STO Button Press to store the current switching setting to a preset (see Section
6.3
)
9 RCL Button Press to recall the current switching setting from a preset (see Section
6.3
)
10 LOCK Button Press and hold to toggle the locking/release of the front panel buttons.
When storing or recalling presets, press to store or recall the preset (see
Section
6.3
)
11 EDID Button Press to capture the EDID (see Section
6.2
)
12 OUTPUT/INPUT 7-segment LED
Display
Displays the input currently switched to the output which is marked above each input
im Vertrieb von CAMBOARD Electronics
www.camboard.de Tel. 07131 911201
Fax 07131 911203 ce-info@camboard.de