VS-84HDCPxl - Operating the VS-84HDCPxl 8x4 DVI Matrix Switcher
15
15
Figure 6: SELECTOR Buttons
The gray numbers (1 to 12) in
Figure 6
that illustrate the corresponding
store/recall configuration numbers are for the purpose of illustration
only and do not actually appear on the buttons.
To store a setup:
1. Set the device to the desired setup.
For example, press the OUT 3 button and IN 4 button.
You can set any of the IN-OUT buttons
2. Press the STO button.
The STO button flashes.
3. Select an OUT or IN SELECT button to store the machine setup (for
example, OUT 4).
4. Press the LOCK button to store the current setup.
In this example, the OUT 4 button stores the setup.
Press the LOCK button within 10 seconds as the store operation times out
automatically after this period.
To recall a setup:
1. Press the RCL button.
The RCL button flashes.
2. Press the relevant OUT or IN button that stored the setup.
In this example, press OUT 4.
3. Press the LOCK button to recall the stored setup.
i