Connecting the VS-6EII 4x4 Video Audio Matrix Switcher
3
Table 1: Front Panel VS-6EII Features
# Feature
Function
1
POWER Switch Illuminated switch for turning the unit ON or OFF
2
INPUTS
Select the video source (from A to D)
3
OUTPUTS
Select the video acceptor (from 1 to 4)
Table 2: Rear Panel VS-6EII Features
# Feature
Function
1
AUDIO R IN RCA Connectors
Connects to the right audio source (A, B, C, D)
2
AUDIO L IN RCA Connectors
Connects to the left audio source (A, B, C, D)
3
AUDIO R OUT RCA Connectors
Connects to the right audio acceptor (1, 2, 3, 4)
4
AUDIO L OUT RCA Connectors
Connects to the left audio acceptor (1, 2, 3, 4)
5
Power Connector with Fuse
230 VAC 50/60 Hz (115 VAC, U.S.A.) power inlet
6
VIDEO OUT BNC Connectors
Connects to the video acceptor (1, 2, 3, 4)
7
VIDEO IN BNC Connectors
Connects to the video source (A, B, C, D)
5 Connecting the VS-6EII 4x4 Video Audio Matrix Switcher
To connect the VS-6EII 4x4 Video Audio Matrix Switcher, as Figure 2
illustrates, do the following
1
:
1. Connect up to 4 composite video sources
2
(A, B, C, and D) to the appropriate
VIDEO BNC IN connectors and AUDIO L and R RCA IN connectors.
2. Connect the appropriate VIDEO BNC OUT connectors and AUDIO L and R
RCA OUT connectors to up to 4 composite video acceptors
2
(1, 2, 3, and 4).
3. Connect the power cord to the mains electricity (not illustrated Figure 2).
Figure 2: VS-6EII 4x4 Video Audio Matrix Switcher Connections
1 Switch OFF the power on each device before connecting it to your VS-6EII. After connecting your VS-6EII, switch on its
power and then switch on the power on each device
2 For example, VCR units
