Defining the VS-66H3 6x6 HDMI Matrix Switcher
7
Figure 2: VS-66H3 6x6 HDMI Matrix Switcher Rear Panel
Table 2: VS-66H3 6x6 HDMI Matrix Switcher Rear Panel Features
#
Feature
Function
13
OUTPUT
HDMI Connector
s
(1 to 6)
Connect to up to 6 HDMI acceptors
14
INPUT
HDMI Connectors (1 to 6)
Connect to up to 6 HDMI sources
15
RS-232
9-pin D-sub Serial Port Connector Connect to a PC/serial controller
16
ETHERNET
RJ-45 Connector
Connect to a PC via a LAN
17
ETH RESET
Button
Press to reset to the factory default IP parameters
1
18
REMOTE IR
Opening
2
Connect to an external IR receiver for controlling the device via an IR remote controller (see
Section
4.1
)
19
Mains Power Connector
Connect to the mains power
20
Mains Power Fuse
Fuse for protecting the device
21
Mains Power Switch
Switch for turning the device on or off
1 First turn the VS-66H3 off and then turn it on again while pressing the ETH RESET button. The device will power up and load its memory with the factory default IP parameters
2 Covered by a cap. The 3.5mm jack at the end of the internal IR connection cable fits into this opening
