Operating the VS-5x5
17
7.5.3
Deleting an Input/Output Configuration
To delete an input/output configuration, do the following:
1. Press the STO and RCL buttons simultaneously.
Both the STO and RCL buttons blink.
2. Press the appropriate Input / Output button.
This erases that specific input/output configuration from the memory,
leaving it empty and available
1
.
7.6 Locking the Front Panel
To prevent changing the settings accidentally or tampering with the unit via
the front panel buttons, lock
2
your
VS-5x5
. Unlocking releases the protection
mechanism.
To lock the
VS-5x5
:
Press the LOCK button for more than two seconds, until the LOCK button
is illuminated
The front panel is locked. Pressing a button will have no effect, except to
cause the LOCK button to blink
3
To unlock the
VS-5x5
:
Press the illuminated LOCK button for more than two seconds, until the
LOCK button is no longer illuminated
The front panel unlocks
7.7 Adjusting the Audio Gain Control
You can adjust the gain control for each input and output using the latest
4
K-Router Windows®-based control software (provided). (See the tables of
Hex Codes for Audio Input/Output Gain Control in section 11, if you want to
program a serial controller to control the audio gain).
1 Storing a new configuration over a previous configuration (without deleting it first) replaces the previous configuration
2 Nevertheless, even though the front panel is locked you can still operate via RS-232 or RS-485, as well as via the Kramer
IR Remote Control Transmitter
3 Warning that you need to unlock to regain control via the front panel
4 Version 3.9 or higher
