VS-48HDCPxl - Connecting the VS-48HDCPxl
15
15
6. Select
Use the following IP Address
for static IP addressing and fill in the
details as shown in
Figure 7
.
For TCP/IPv4 you can use any IP address in the range 192.168.1.1 to
192.168.1.255 (excluding 192.168.1.39) that is provided by your IT
department.
Figure 7: Internet Protocol Properties Window
7. Click
OK
.
8. Click
Close
.
5.2.2
Connecting the Ethernet Port via a Network Hub or Switch
You can connect the Ethernet port of the
VS-48HDCPxl
to
the Ethernet port on a
network hub or using a straight-through cable with RJ-45 connectors.
5.2.3
Control Configuration via the Ethernet Port
To control several units via Ethernet, connect the Master unit (Device 1) via the
Ethernet port to the Ethernet port of your PC. Use your PC provide initial
configuration of the settings (see
Section
5.2
).
Summary of Contents for VS-48HDCPxl
Page 2: ......
Page 12: ...VS 48HDCPxl Installing in a Rack 9 4 Installing in a Rack ...
Page 29: ......