KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VS-44HDMI 4 x 4 HDMI Matrix Switcher
10
7
Operating the VS-44HDMI 4 x 4 HDMI Matrix Switcher
This section describes how to:
Route inputs to outputs (see section 7.1)
Disconnecting outputs (see section 7.2)
Store and recall a setup (see section 7.3)
Acquire the EDID (see section 7.4)
Control the machine via RS-232 (see section 7.5)
Control the machine via the ETHERNET port (see section 7.6)
7.1 Routing Inputs to Outputs
To route an input to an output:
Press an OUT key, followed by an IN key to route this input to
that output
To route one input to all outputs:
Press ALL followed by an IN button. The input is routed to all
outputs
7.2 Disconnecting the Outputs
To disconnect one output:
Press the OUT button of the output to disconnect and press OFF
To disconnect all outputs at once:
Press the ALL button and then press OFF. This disconnects all the
outputs
7.3 Storing and Recalling a Setting
You can use the STO and RCL buttons to store up to 8 setups and then recall
them.
To store a setting:
1. Set the machine to the desired setting.
For example, press the OUT 3 button and IN 4 button
1
.
2. Press the STO button.
The STO button blinks.
1 You can set all the switcher IN-OUT buttons
