Kramer Electronics Ltd.
VS-44H2A
– Using Embedded Web pages
24
Changing Input Name
It may be convenient to change input names to reflect the video sources connected to them.
To change input name:
1. In the Navigation pane, click
Switching
.
The Switching page appears (
).
2. Click the Edit Input icon
from an Input button (
).
The Input Settings group appears (
).
3. Type a new name (up to 11 characters) and click
Save
.
The input name changes.
Setting Input HDCP Behavior
To set input HDCP behavior On/Off:
1. In the Navigation pane, click
Switching
.
The Switching page appears (
).
2. Click the Edit Input icon
from an Input button (
).
The Input Settings group appears (
3. Set input HDCP to On/Off.
Input supports an HDCP device if HDCP is set to On.
There are video sources (e.g., some Apple devices) that automatically switch to
HDCP mode if connected to a device that supports HDCP (e.g.
VS-44H2A
). If an
acceptor/display connected to
VS-44H2A
does not support HDCP, you might want
to set Input HDCP to Off, so that the video source does not auto-switch to HDCP
mode and the acceptor does not display the video.
DRAFT