![background image](http://html.mh-extra.com/html/kramer/vs-4228/vs-4228_user-manual_2001333013.webp)
10
VS-4228 - Connecting the VS-4228
4
Connecting the VS-4228
Always switch off the power to each device before connecting it to your
VS-4228
. After connecting your
VS-4228
, connect its power and then
switch on the power to each device.
To connect the VS-4228 as illustrated in
1. Connect ports 1 through 8 to all master and slave devices using 9-pin D-sub
(M) connector cables.
Not all ports have to be connected.
The power cord is not shown in
2. If RS-232 control is required, connect a PC via the null-modem adapter
(when using the Kramer Control software or other controller) as described in
Section
3. If RS-485 control is required, connect a cable to the RS-485 terminal block,
as described in
Section
Figure 5: Connecting the VS-4228
8-Port RS-422 Matrix Switcher
i
Summary of Contents for VS-4228
Page 2: ......
Page 23: ...20 VS 4228 Hex Codes ...