#
Feature
Function
21
REMOTE SELECTOR
(
1-4, G
) Terminal Block
Connects to external contact closure input switches
22
SETUP
DIP-switches (
1-8
)
N/A
23 Power Connector with Fuse
100-240V AC connector, enabling power supply to the unit
Step 3: Install the VS-41H2
Attach the rubber feet and place on a table or mount the
VS-41H2
in a rack using the included rack ears.
Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your
VS-41H2
.
For optimum range and performance, use the recommended Kramer cables available at
www.kramerav.com/product/VS-41H2
RJ-45 pinout:
Connect the audio output:
For the Ethernet and HDBaseT connectors, use the following
wiring diagram:
To a balanced stereo audio
acceptor:
To a unbalanced stereo
audio acceptor:
PIN EIA /TIA 568B
PIN Wire Color
1
Orange / White
2
Orange
3
Green / White
4
Blue
5
Blue / White
6
Green
7
Brown / White
8
Brown
Step 5: Connect the power
Connect the power cord to the
VS-41H2
and plug it into the mains electricity.
Safety Instructions
Caution:
There are no operator serviceable parts inside the unit.
Warning:
Use only the power cord that is supplied with the unit.
Warning:
Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.
Warning:
Disconnect the power and unplug the unit from the wall before installing.
See
for updated safety information.
Step 6: Operating the VS-41H2
Switch an input to an output:
•
Press an input button (1 to 4) to switch that input to the output.
Generate a test pattern
:
For diagnostic purposes, you can generate up to four test patterns:
•
Press
PATTERN
.
•
Press any of the input buttons to select a test pattern.
The selected test pattern appears on the outputs.
•
To exit the test pattern, press
PATTERN
once again.
