VS-41H2 Quick Start (P/N: 2900-300835QS REV 4)
P/N:
2900- 300835QS
Rev:
4
Scan for full manual
VS-41H2 Quick Start Guide
This guide helps you install and use your
VS-41H2
for the first time.
Go to
www.kramerav.com/downloads/VS-41H2
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
VS-41H2
4x1 HDMI 2.0 Switcher
1 Set of rack ears
1 Quick start guide
1 Power cord
4 Rubber feet
Step 2: Get to know your VS-41H2
#
Feature
Function
1
IR LED
For future use
2
IR
Receiver
For future use
3
INPUT SELECTOR
(1-4)
Press to route HDMI source 1 through 4 to the output
4
EDID
Lock Button
Press to lock the current EDID
5
PATTERN
Button
Press to activate the test pattern generator. When the generator is active,
press one of the input buttons to select a test pattern
6
LOCK
Button
Press and hold to toggle locking and unlocking the front panel buttons
7
MUTE
Button
Press to toggle muting of the output audio and video
8
VOLUME
Buttons (▲ ▼)
Press ▲ to increase volume, press ▼ to decrease volume
(flashes 3 times
when max. or min. value is reached)
9
AUDIO MUTE
Button
Press to toggle muting of the output audio
10
HDMI INPUTS (1-4)
Connectors
Connect to up to 4 HDMI sources
11
HDMI OUTPUTS MONITOR
Connector
Connects to an HDMI monitor
12
HDMI OUTPUTS OUT
Connector
Connects to an HDMI acceptor
13
AUDIO IN
3.5mm Mini Jack
Connects to an unbalanced stereo audio acceptor
14
AUDIO OUT
Terminal Block Connector
Connects to a balanced stereo audio acceptor
15
RS-232
9-pin D-sub Connector
Connects to a local RS-232 source
16
ETHERNET
RJ-45 Connector
Connects to a network for control (LEDs: activity–flashing green, link–orange)
17
RESET Button
Press while power-cycling the device to reset to factory default parameters
18
PROGRAM
Mini USB Connector
Used for upgrading the firmware
19
REMOTE IR
3.5mm Connector
For future use
20
REMOTE LEDS
(
1-4, G
) Terminal Block
Connects to external LED indicators
