KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting a Vertical Interval Video-Audio Matrix Switcher
8
6 Connecting a Vertical Interval Video-Audio Matrix Switcher
To connect the
VS-402XL
/
VS-602XL
, as illustrated in the example in
Figure
3
, do the following
1
1. Connect up to four/six composite video and stereo audio
:
2
2. Connect the two OUTPUT BNC connectors and terminal block connectors to
up to two composite video and stereo audio
sources (for example,
composite video players) to the IN BNC connectors and terminal block
connectors, respectively.
2
acceptors (for example, composite
video recorders).
3. Set the DIP-switches (see section
6.3
).
4. Connect
3
the power cord
4
5. If required, connect the following
.
4
:
A PC (when using the Kramer Control software, for example
)
or other
RS-232 (see section
6.1
) or RS-485 controller (see section
6.2
).
A REMOTE contact closure switch (see section
6.4
)
1 Switch OFF the power on each device before connecting it to your VS-402XL/VS-602XL Switcher. After connecting your
VS-402XL/VS-602XL Switcher, switch on its power and then switch on the power on each device. Switching on the
VS-402XL/VS-602XL Switcher, recalls the last status prior to powering down
2 Balanced or unbalanced (see section
6.5
)
3 We recommend that you use only the power cord that is supplied with this machine
4 Not shown in
Figure 3