Kramer VS-34FD, User Manual, Page: 15 / 64

Kramer Electronics Ltd.
VS-34FD
– Operating and Controlling – Front Panel
13
Operating and Controlling – Front
Panel
VS-34FD enables you to operate and control your matrix from the front panel buttons.
You can also operate and control VS-34FD via Protocol 3000 commands (see Protocol 3000
Commands on page 48 ) and via the embedded web pages (see Operating and Controlling
–
Embedded Web Pages on page 19 ).
VS-34FD enables you to do the following:
•
Starting Up on page 13 .
•
Switching
– Front Panel
on page 14 .
•
Locking Front Panel Buttons on page 17 .
•
Copying EDID
– Front Panel
on page 17 .
•
Restarting
– Front Panel
on page 18 .
•
Performing Factory Reset
– Front Panel
on page 18 .
•
Viewing Device Information
– Front Panel
on page 18 .
Starting Up
To start up VS-34FD:
1. Turn on the power switch.
The LCD display shows a series of screens as VS-34FD is booting up and then it
displays the last video input/output routing setup that was used.
KRAMER ELECTRONICS Co.,LTD
VS-34FD MATRIX
Loading Main Setup
PLEASE WAIT
VOSW: 01 02 03 04 05 06 07 08
VISW: 11 12 13 14 15 16 17
Figure 9: Default Startup Status Display Sequence
An output with no corresponding input shown under it indicates that this output is not
routed to any input.
2. Press the MENU Button twice to see the last audio input/output routing setup that
was used.
3. If there are more than 13 input/outputs in the matrix, press the
◄ (backward) and ►
(forward) Buttons to shift the LCD display to the right or left.
13
1