Kramer VS-3232DN-EM, User Manual, Page: 31 / 128

Kramer Electronics Ltd.
VS-3232DN-EM
– Using the Configuration Menus
28
4. Press TAKE.
The setup is stored in the selected preset for subsequent recall. The display reverts to
the output/input display.
Setup Menu — 6: recall setup XX, Recalling a Preset
This option recalls a stored configuration from a preset (1 to 60).
To recall a stored configuration:
1. Press MENU.
The Setup Menu options are displayed.
2. Press 6 (RCL) on the numeric keypad (see Figure 2 ).
The following is displayed:
recall <= __
3. Using the numeric keys, enter the preset (in this example, 02) to recall.
The following is displayed:
Wait …..
After a few seconds, the following is displayed on the right-hand side:
CONFIRM
RECALL <= 02
The TAKE button flashes.
4. Press TAKE.
The preset is recalled. The display reverts to the output/input display.
Using the Config Menu
The Config Menu provides access to configuration settings that are not regularly changed and
comprises the following options:
•
Input signal detection display ( Config Menu
—Input Signal Detection
Display on page 29 ).
•
Input port parameter setting ( Config Menu
—Setting Input Port Parameters
on page 29 ).
•
Output load detection display (see Config Menu
—Output Load Detection
Display on page 31 ).
•
Output port parameter setting ( Config Menu
—Setting Output Port
Parameters on page 31 ).
•
Storing the default setup ( Config Menu
—Store Default Setup
on page 32 ).
•
Total matrix reset ( Config Menu
—Total Matrix Reset
on page 33 ).
•
Display firmware versions ( Config Menu
—Display Firmware Versions
on page 33 ).
To enter the Config Menu:
•
Press MENU twice. The MENU button lights and the following message is displayed:
Start configuration menu
MENU to view setups ENT to change them