Step 3: Install VS-21DTP
Install
VS-21DTP
using one of the following methods:
Attach the rubber feet and place the unit on a flat surface.
Fasten a bracket (included) on each side of the unit and attach it to a flat surface.
www.kramerav.com/downloads/VS-21DTP
Mount the unit in a rack using an optional
RK-3T
rack adapter.
Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your
VS-21DTP
. For best results, we recommend that you
always use Kramer high-performance cables to connect AV equipment to
VS-21DTP
.
DIP-switches Setup:
A switch that is down is on; a switch that is up is off. By default, both switches are up (off).
Video Switching Selection:
DIP-switch 1
DIP-switch 2
Video Input Selection
PRIORITY (down)
DEF 1 (up)
INPUT 1 is the default priority setup and is automatically switched to the
output.
DEF 2 (down)
INPUT 2 is the default priority setup and is automatically switched to the
output.
LAST CONNECTED (up) N/A
The last connected source is switched to the output (a reactivated or
reconnected source becomes the new “Last Connected” source).
Contact Closure Switches (Manual Override):
Controlling via the remote contact closure pushbuttons overrides all DIP-switch settings and automatic switching until the manually
selected source disconnects, becomes inactive or the
VS-21DTP
is powered off.
Select INPUT 1
Momentarily connect REMOTE IN 1 to PIN G (ground).
Select INPUT 2
Momentarily connect REMOTE IN 2 to PIN G (ground).
Step 5: Connect the power
Connect the 48V DC power supply to
VS-21DTP
and plug it into the mains electricity or accept power over Ethernet (PoE) from an
HDBaseT receiver via PoE.
Safety Instructions
Caution:
There are no operator serviceable parts inside the unit.
Warning:
Use only the power cord that is supplied with the unit.
Warning:
Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.
Warning:
Disconnect the power and unplug the unit from the wall before installing.
See
for updated safety information.
