VS-21DTP Quick Start (P/N: 2900-300924QS REV 1)
P/N:
2 9 0 0 - 3 0 0 9 2 4 QS
Rev: 1
Scan for full manual
VS-21DTP Quick Start Guide
This guide helps you install and use your
VS-21DTP
for the first time.
www.kramerav.com/downloads/VS-21DTP
to download the latest user manual and check if
firmware upgrades are available.
Step 1: Check w
hat’s in the box
VS-21DTP
2xHDMI to HDBT Standby Switcher/POE
4 Rubber feet
1 Bracket set
1 Power adapter and cord
1 Quick start guide
Step 2: Get to know your VS-21DTP
#
Feature
Function
1
ACTIVE INPUT LEDs (1 to 2)
Lights green when the input is active. Both LEDs flash when no input is active.
2
PRIORITY LED
Lights green when DIP-switch 1 is set to PRIORITY (down).
3
LAST CONNECTED LED
Lights green when DIP-switch 1 is set to LAST CONNECTED (up).
4
POE STATUS LED
Lights green when the unit provides PoE.
5
ON LED
Lights green when the unit is powered on via power adapter or PoE.
6
INPUT HDMI Connectors (1 to 2)
Connect to an HDMI source.
7
HDBT OUT RJ-45 Connector
Connect to an HDBaseT receiver (for example,
TP-580R
) and provide or
accept power (bidirectional PoE).
8
LAST CONN/PRIORITY DIP-switch 1
Set DIP-switch 1 up (off) to select the Last Connected input.
Set DIP-switch 1 down (on) to select the Priority input determined by
DIP-switch 2.
9
DEF 1/DEF 2 DIP-switch 2
Set DIP-switch 2 up (off) to define INPUT 1 as the default (priority) input.
Set DIP-switch 2 down (on) to define INPUT 2 as the default (priority) input.
10 REMOTE 3-pin Terminal Block Connector
Connects to optional contact closure switches 1 or 2 for manual switching (by
momentary contact between the desired pin and the G pin).
11 48V DC Power Terminal Block Connector
Connect to the Kramer power adapter.
