Connecting the VS-21A
3
Table 2: Rear Panel VS-21A 2x1 Component Video / Digital Audio Switcher Features
#
Feature
Function
2
Y RCA Connector
3
U RCA Connector
4
C
om
po
ne
nt
V
id
eo
V RCA Connector
Connects to the component source
1
5
IN
P
U
T
1
1
AUDIO RCA Connector
Connects to the digital audio source
1
6
Y RCA Connector
7
U RCA Connector
8
C
om
po
ne
nt
V
id
eo
V RCA Connector
Connects to the component acceptor
9
O
U
TP
U
T
AUDIO RCA Connector
Connects to the digital audio acceptor
5 Connecting the VS-21A
To connect your
VS-21A
, as illustrated in Figure 2, do the following
2
:
1. Connect the INPUT 1 channels as follows:
Connect a component source (for example, a set top box source) to
the three YUV
3
RCA connectors
Connect a digital audio source to the AUDIO RCA Connector
4
(not
illustrated in Figure 2)
2. Connect the INPUT 2 channels as follows:
Connect a component source (for example, a Betacam video player)
to the three YUV
3
RCA connectors
Connect a digital audio source to the AUDIO RCA Connector
3. Connect the OUTPUT channels as follows:
Connect the three YUV
5
OUTPUT RCA connectors to a component
acceptor (for example, a plasma display)
Connect the AUDIO RCA connector to a digital audio acceptor (not
illustrated in Figure 2)
4. Push in the front panel
INPUT SELECTOR
switch to route input 2, or
release it to route input 1.
1
Same for INPUT 2
2
Switch OFF the power on each device before connecting it to your VS-21A. After connecting your VS-21A, switch on the
power on each device
3 Connect the Y component video channel to RCA connector Y; Connect the B-Y component video channel to RCA
connector U; Connect the R-Y component video channel to RCA connector V
4
Or an analog mono unbalanced source
5
Connect the Y RCA connector to the Y component video channel; Connect the U RCA connector to the B-Y component
video channel; Connect the V RCA connector to the R-Y component video channel
