Kramer Electronics Ltd.
VS-1616DN-EM
– Using the Configuration Menus
27
Using the Config Menu
The Config Menu provides access to configuration settings that are not regularly changed and
comprises the following options:
•
Input signal detection display (
).
•
Input port parameter setting (
—Setting Input Port Parameters
).
•
Output load detection display (see
).
•
Output port parameter setting (
).
•
Storing the default setup (
).
•
Total matrix reset (
).
•
Display firmware versions (
).
To enter the Config Menu:
•
Press MENU twice. The MENU button lights and the following message is displayed:
Start configuration menu
MENU to view setups ENTER to change them
When browsing through the configuration menu, enabled buttons light or flash.
Use the Config Menu as follows:
1. Press the MENU button to cycle through the menu items.
The LCD display shows the current status of the selected menu item.
2. Press the ENTER button to enter a submenu.
3. After entering a submenu, you can select between several options.
Select an option by pressing one of the illuminated buttons in the Selector Buttons area.
4. After selecting the desired option, a description of the desired change is displayed and
the TAKE button flashes.
5. Press the flashing TAKE button to confirm the change.
A description of the current state is displayed for about one second. The unit
automatically switches to the next item in the menu.
Config Menu
—
Input Signal Detection Display
This option displays a list of inputs and indicates on which of them signals have been
detected.
To display a list of inputs that have detected signals:
1. Press MENU twice.
The following message is displayed:
start configuration menu
MENU to view setup ENTER to change them
