![background image](http://html.mh-extra.com/html/kramer/vs-1616a/vs-1616a_user-manual_2001293047.webp)
Viewing the MENU Commands Sequence
43
43
2. Press the
TAKE
button.
The Displays show the messages:
OUTkey 1: Stand-Alone UNIT
2: Large Matrix
Current
Matrix
3. Press the
OUT
button
#
2
.
The Displays show the messages:
set NEW matrix
new -> TAKE leave old -> MENU
current:
16x32
4. Press the
TAKE
button again.
The Displays show the messages:
READY to set MACHINE ADDRESS
use OUTkey 1-9, 0
current #
1
5. Press an
OUT
button
#
1-9, 0
.
The STATUS Display shows the message:
current: x
Where x is the OUT button # pressed
6. Press the
TAKE
button again.
The
TAKE
LED blinks and the Displays show the messages:
READY to change MACH. ADDR.
Press TAKE to confirm
from # 01
to #0x
7. Press the
TAKE
button again.
The Displays show the messages:
MACHINE ADDRESS
changed
current #
x
After a few seconds, the Displays show the messages:
SET highest MACHINE ADDRESS
use OUTkey 1-9, 0
current #
x
8. Press an
OUT
button
#
1-9, 0
.
The STATUS Display shows the message:
current:
x
Where x is the OUT button # pressed
9. Press the
TAKE
button again.
The MATRIX Display shows the message:
Change highest MACH. ADDR. ?
Press TAKE to confirm