Upgrading the VS-121HC Firmware
19
4. Power the
VS-121HC
ON.
Note
: This sequence is critical – first operate the FLASH PROG switch
and then power on the unit
9.1.3 Installing the Device Firmware
To install the firmware, perform the following steps:
1. Double-click the desktop icon
Shortcut to FLIP.EXE
.
The Splash screen appears
1
:
Figure 10: Splash Screen
2. After a few seconds, the Splash screen is replaced by the “
Atmel – Flip
”
window:
1 The screens appearing in this manual are examples of the process. The actual screens may differ in their content.